 |
||||||
|
Air diaphragm pumps are ideal for mounting onto drums Insert a ‘D’ (e.g., PTD-05) into the pump model number for the drum pump configuration. The pumps are built with the bottom port facing downward. A bung adaptor and suction tube are included. The suction tubes are a standard 40˝ (102 cm.) so you will need to cut the suction tube to length, screw the bung adaptor into the drum bung hole and, there you have it — the best little drum pump in the world! Diaphragm Drum Pumps have the following advantages over traditional style drum pumps:• Transfer of fluids containing particles • Run dry capability • Good for shear sensitive materials • Inherently explosion proof — non-electrical • Self-priming • High viscosities are not a problem • Reduced solvent flash off • Intermittent Operation or Continuous Duty • Variable flow rate • Dual discharge manifold capability All-Flo makes it easy:All-Flo Drum Pumps have a special bung adaptor design which permits moving the pump from one drum to another without attaching and unscrewing special mounting plates. Just slip the lightweight pump out of one drum and into another in seconds! Extra bung adaptors are available. |
||||||
|
||||||
(See the brochure for specifications)